Skip to content
VegTech Systems

Guide

Pre-season startup checklist for fruit and vegetable processing lines

A printable walk-down for maintenance managers, food-safety leads and plant managers: equipment and food-contact surfaces, sanitation, instrument calibration, lockout/tagout and sign-off, with the CFR sections behind each item.

By · Updated · 6 min read

Key takeaway

Before the first run of the season, confirm five things and write them down: equipment and food-contact surfaces are cleanable, maintained and sound; the plant is clean and in repair with suitable cleaning and sanitizing chemicals; instruments that control microbial growth are accurate and calibrated where your food safety plan requires it; the lockout/tagout procedure inspection and training are current; and a named person has signed off each area.

A line that sat idle for months can return with worn food-contact surfaces, moved or added equipment, instruments out of calibration and crews who haven't worked the line since last season. Print this list, walk each area and record the result. Items marked with a citation come from the regulation text linked below; the rest are plant practice. This page is general information, not legal or regulatory advice.

Equipment & food-contact surfaces

  • Every piece of equipment and every utensil on the line is adequately cleanable and is adequately maintained, so it protects against allergen cross-contact and contamination (21 CFR 117.40(a)(1)).
  • Equipment moved, added or rebuilt in the off-season is installed so the equipment and the spaces around it can be cleaned and maintained (21 CFR 117.40(a)(3)).
  • Food-contact surfaces are corrosion-resistant, made of nontoxic materials, and able to withstand the product and the cleaning compounds and sanitizers you use (21 CFR 117.40(a)(4)–(5)). Look for corrosion, pitting or damage that appeared during the idle months. See food-contact surface.
  • Repairs made in the off-season are complete, and parts or tools used for them are removed from the line.

Sanitation

  • Buildings, fixtures and other physical facilities around the line are clean and sanitary, and in repair adequate to prevent food from becoming adulterated (21 CFR 117.35(a)).
  • Cleaning compounds and sanitizing agents on hand are safe and adequate under the conditions of use (21 CFR 117.35(b)(1)).
  • The pre-start cleaning and sanitizing follows your written sanitation procedures and is recorded.

Instruments & calibration

  • Instruments and controls that measure, regulate or record temperature, pH, acidity, water activity or other conditions that control microbial growth are accurate, precise and adequately maintained (21 CFR 117.40(f)).
  • Where your food safety plan uses them as process monitoring or verification instruments, calibration (or an accuracy check) is done (21 CFR 117.165(a)(1)). See process monitoring instrument calibration.
  • Each instrument checked is listed with its ID, the reference used, the result and the date.

Lockout-tagout

  • The periodic inspection of the energy control procedure has been done within the last year (29 CFR 1910.147(c)(6)(i)). See lockout/tagout (LOTO).
  • Employees who will work on or around the line have the training they need to understand the energy control program and to safely apply, use and remove energy controls (29 CFR 1910.147(c)(7)(i)). Check returning and new seasonal staff by name.
  • Energy-isolation points on equipment moved or added in the off-season are covered by your procedures.

Sign-off

AreaChecked byDateOpen items
Equipment & food-contact surfaces   
Sanitation   
Instruments & calibration   
Lockout-tagout   
Line released for first run   

Record anything that fails as an open item with an owner, and don't release the line until it is closed or a responsible person has accepted it in writing. If you are comparing replacement equipment found during the walk-down, use the supplier comparison checklist.

Questions

What should a fruit or vegetable plant verify before the first run of the season?
Check that equipment and utensils are cleanable and maintained, that equipment is installed so it and the space around it can be cleaned, and that food-contact surfaces are corrosion-resistant and nontoxic (21 CFR 117.40). Confirm the plant and fixtures are clean and in repair and that cleaning compounds and sanitizers are safe and adequate under the conditions of use (21 CFR 117.35(a) and (b)(1)). Confirm instruments that control microbial growth are accurate and maintained (21 CFR 117.40(f)), and that calibration is current where your food safety plan requires it (21 CFR 117.165(a)(1)). Confirm the lockout/tagout procedure inspection and training are current (29 CFR 1910.147(c)(6)(i) and (c)(7)(i)). Then record who checked what, and when.
Do instruments really need to be calibrated before startup?
FDA's CGMP rule requires instruments and controls that measure, regulate or record temperature, pH, acidity, water activity or other conditions that control microbial growth to be accurate, precise and adequately maintained (21 CFR 117.40(f)). Where preventive controls apply, verification includes calibrating process monitoring and verification instruments, or checking them for accuracy (21 CFR 117.165(a)(1)). The rule doesn't set a pre-season date; startup is a practical time to confirm calibration and accuracy checks are current.
How often must the lockout/tagout procedure be inspected?
OSHA requires a periodic inspection of the energy control procedure at least annually (29 CFR 1910.147(c)(6)(i)). It also requires training so employees understand the energy control program and can safely apply, use and remove energy controls (29 CFR 1910.147(c)(7)(i)).
Is this checklist a compliance standard?
No. It is a plain-language starting point built from the cited regulations. It is not legal or regulatory advice. Adapt it to your products, equipment, food safety plan and energy control program, and confirm requirements with the regulation text and your own advisers.

Sources

  • 21 CFR 117.35, Sanitary operations. eCFR
  • 21 CFR 117.40, Equipment and utensils. eCFR
  • 21 CFR 117.165, Verification of implementation and effectiveness. eCFR
  • 29 CFR 1910.147, The control of hazardous energy (lockout/tagout). eCFR

This checklist summarizes public regulation text for general information. It is not legal or regulatory advice.